Trimble
PDF Export RSS - Latest News


Save edge as Alignment

If there is a need to store the road surface edge or road model edge as an alignment in the model it is possible to do this by right-clicking a road surface in the Cross-section Viewer or in the Road Surface dialog. Then select to save edge as alignment.

This will create a Line task with the name: P_<TaskName>_<EdgeName>.

  • <TaskName> refers to the road task name
  • <EdgeName> refers to the road surface number edge. For road model edge the value will be -9.99 or 9.99.

The surface edge saved as alignment will be updated for every build of the roadmodel if the checkbox for updating dynamic alignments is turned on in the model settings. If the checkbox is turned off the surface edge alignment will not be updated.

When using this function the user will be asked to save as Road Alignment or a non-alignment line.

  • Road Alignment - the alignment can be used as a reference alignment for another road task
  • Non-alignment line - the alignment can only be used as alignment as surface edge in another road task

To make a Line task not recognizable by the road model that created it is possible to rename the Line task. From this point on the Line task will not be updated when rebuilding the road task.


Non-reserved Line tasks will not be updated when rebuilding the Road task. Reserve the Line tasks to be able to update them.

Last modified: 2020/05/19 13:40 by vn_no_dso