Trimble
PDF Export RSS - Latest News


Plant bed (one species)

This function is used to set out and calculate plan symbols in a plant bed with or without a description. It is also possible to only set out plant point without the symbol. You will also get an annotation label with number of symbols and type and symbol description. You can add a symbol description and insert a text while inserting the symbols, or you can add this information later using'Object menu (NCO)'

MOUS_ICO Menu: Landscape > Planting Design > Plant Bed (One Species)
MOUS_ICO Toolbar: Planting Design: Plant Bed (One Species)

Starting the function you will get this command prompts: Enter the plantation area (perimeter): Pick a line,arc,polyline:<Enter> = Read from file Ok Select a line, lines or polylines. The direction of the line will start at end of the first element you selected. If you press enter you will get a dialog that enables you to read an alignment from a ten table, INH-file or LIN-file. Pick a line,arc,polyline/Undo: Initiation is OK (7 elements) Enter path for plant rows: Element/<Points> : This function is used to the side the angle of the symbols. Element is an existing element in the drawing. If you select point you can point at points in the drawing to determine the angle. Define what you want to do from the dialog.

Parameters forsymbol placement

Before using this function you should read the topics Single and Row.The single topic describes setting out singles plant. The row topic describes the use of the row function. The description below concentrate on the parameters that differ from the topic single.

Staggered

If this is activated the symbols will be placed in a staggered pattern (triangle pattern) with the given row distance and plant distance

Parallel

If this is activated the symbols will be placed in a parallel pattern (square pattern) with the given row distance and plant distance

Random

If this is activated the symbols will be placed in a random pattern using the row distance and plant distance +- 1/3 of the given row and plant distance.

Dist. boundary line

This distance determines the placement of the plant from the chosen baseline. A help line will be drawn temporarily to make it easier to place the first plant. Fill out the parameters and press OK. You get the following command prompt: Select position for the the first plant in the bed ←27574.20,240511.35,0.00> : If you have typed in a value for distance boundary line, this line will be temporarily drawn and you can snap the first plant to the line


Symbol overview:


46 (100.00%) (IDUOU\PPDEC001.DWG)


46 total.


Label plants? Yes/<No> : n If you select label plants you will be prompt to point at the start and end point of the annonation label.

en/np/landscape/menu/planting_design/plant_bed_one_species.txt · Last modified: 2011/07/20 14:45 by vn_no_sfi