Trimble
PDF Export RSS - Latest News


Novapoint 21.FP3

Updates in Novapoint Base

General

This feature pack mostly contains bug fixes and improvements.

Table View

  • IMPROVED: If all input features are the same type, subgroup will be simplified. So, easier to read the table.

Volume Tool

  • IMPROVED: Better performance, more success cases.
  • IMPROVED: Correct result in case that base and comparison are exactly the same surface (removed).

Import/export

  • FIXED: TILOS shift to using road task names and road task IDs
  • FIXED: Finish not available for DBS after transformation
  • FIXED: ProjectWise not working due to use of wrong id
  • FIXED: Export GML - point geometry not exported correctly
  • FIXED: Add possibility to read schema from local disk in GML import
  • FIXED: QuadriModel import added all netelements even if just one or few where selected

Drawing Rule Editor

  • FIXED: Error when saving double attributes in polygonOfTrees Drawing Attributes
  • FIXED: Shapeattributes are named the same in Pres.Setup and in Properties
  • FIXED: Use Built-In Texture - enable texture not working from drawing-rule
  • FIXED: Added feature has spatial condition

Conversion rule editor

  • FIXED: Bugs and Crash in Conversion Rule Editor
  • FIXED: Conversion rule elements not displayed in Conversion Rule Editor

3D/Plan

  • FIXED: Allow Spatial Attributes to be used in renderhandlers
  • FIXED: Abnormanl shutdown - using 3D/plan windows in NP21
  • FIXED: Make it possible to write the volume for solids in plan window
  • FIXED: Turn on/off “personal textures” (specified on geometry)

Div bugs

  • FIXED: Performace issues in Presentation Setup
  • FIXED: Duplicate GUID problem in import in FP2 made trouble when sharing
  • FIXED: Road Marking is not published to EA
  • FIXED: Delete Button not accessible when using Global Attribute Filter in Dynamic Query

Updates in Novapoint Road

Road task

IMPROVED: Finish/Cancel-buttons are a lot faster than previously.

FIXED: Task templates does not give option to select a different reference alignment.


Need to create new task templates as the ones created before NP21.FP3 does not work properly.

FIXED: Crash when extracting quantities in some cases.

FIXED: Crash when building road task in some cases. Still some issues remain that we are working on.

Road model

NEW: Possibility to turn of increased number of cross-secitons in curves. If you want to build the road model in 10m, 20m or 50m intervals this is now possible by turning off this increased accuracy.
You'll find this checkbox under Design > Settings > Chainage > Result accuracy

NEW: Quality Fill is split into two parts in areas where there are removal of soft-soil and vegetation/top-soil so that the new fill starts under existing terrain.
New FillLayer over terrain has properties as before.
New FillLayer under terrain has properties for FillType set to 'Backfill'.

Both quality fill objects are still featuretype FillLayer with 'keyIdentifier' set to 'QUALITYFILL'.


This requires an update of the conversion file in the road task.

Road Surfaces

FIXED: Road surfaces that were never wider than 5mm did not get created.

FIXED: Some road surfaces were not created/connected correctly.

Quantities

CHANGED: Solid objects from the road model that are not validated (smaller geometrical issues as f.ex. overlapping points) will be used as far as possible in the quantity report.
These objects were previously marked in ProcessInfo as “SKIPPED” when creating the quantity report.

CHANGED: Old reportdialog (now named 'Geometry') does not show the quantity report options any more. They also did not work in pre-FP3 from this dialog.
As in all versions of NP21 they are available from the report dialog 'Quantity'.

IMPROVED: Less objects with validation errors so that more of the quantities will be exported if someone in the project uses NP21.FP2a or older.

FIXED: Minor issues in the quantity report (going directly to summary sheet, wrong language used etc.)

FIXED: Some cases when the quantity report was not produced and Novapoint hangs.

Rehabilitation

FIXED: Improved some issues for the results.

Junction Wizard

FIXED: Not always possible to pick the Primary Road to connect to.

Presentation Setup

IMPROVED: Rounding in cut was not shown. It has now it's own rule as part of the soil cuts.
Applies for 'Default', 'Basic 3D' and 'Sketch'.

IFC Export

FIXED: Some connections missing in 'Road 2 IFC' conversion rule.

Draw Roadmodel

FIXED: Data from Landscaping function did not draw with lines or slope symbols.

Updates in Novapoint Bridge

Corrected: Novapoint Bridge doesn't crash anymore if there is a “none-letter” sign in the file name, model name etc.

Updates in Novapoint Tunnel

CORRECTED: Novapoint Tunnel didn't notice when the user switched between different tunnel tasks. This is now corrected.

Updates in Novapoint Water and Sewer

Construction

  • NEW: Added GRIP point for manhole top cover in temp vertical drawing
  • NEW: Split separate functions for Trim in manhole - 1) Trim without adding steps for IN-OUT elevations, and 2) Trim adding steps for IN-OUT elevations
  • NEW: Copy and offset Pipe - give user possibility to copy the attributes from a referenced pipe, give a offset distance, and manholes will be attach to endpoints automatically

Configuration

  • FIXED: Drawing cross section from Configuration only the four first layers was created in the drawing. All other elements was drawn on layer 0.

Updates in Novapoint Road Signs

Finnish version

  • NEW: IFC - Road signs now has its own conversion file “Road Signs 2 IFC” in Novapoint Basis for writing to IFC (HAN-1274)
  • NEW: Store to Quadri - Added support for controlling “Image Quality” (HAN-1311)
  • IMPROVED: Store to Quadri - Now storing masts as extruded Quadri objects (HAN-1283)
  • IMPROVED: Store to Quadri - The speed on saving image is improved (HAN-1262)
  • IMPROVED: Store to Quadri - Now supporting to save images with “color mapping” (HAN-1156)
  • IMPROVED: Drawing Rule - Road Signs is improved for the drawing rule “Sketch” in Base (HAN-1387)
  • IMPROVED: 3D-sign - added support for more than two poles in a “sign configuration” (HAN-1345)
  • IMPROVED: 3D-sign - added support to modify elevation directly in grid for BL, BC and BR (HAN-1346)
  • FIXED: 3D-sign - get elevation from task is improved (HAN-1470)
  • FIXED: TSEXPLODE - some road numbers was not ok after explode (HAN-1371)

Norwegian version

  • NEW: IFC - Road signs now has its own conversion file “Road Signs 2 IFC” in Novapoint Basis for writing to IFC (HAN-1274)
  • NEW: Store to Quadri - Added support for controlling “Image Quality” (HAN-1311)
  • IMPROVED: Store to Quadri - Now storing masts as extruded Quadri objects (HAN-1283)
  • IMPROVED: Store to Quadri - The speed on saving images is improved (HAN-1262)
  • IMPROVED: Store to Quadri - Now supporting to save images with “color mapping” (HAN-1156)
  • IMPROVED: Drawing Rule - Road Signs is improved for the drawing rule sketch in Base (HAN-1387)
  • IMPROVED: 3D-sign - Added support for more than two poles in a “sign configuration” (HAN-1345)
  • IMPROVED: 3D-sign - Added support to modify elevation directly in grid for BL, BC and BR (HAN-1346)
  • IMPROVED: 560 - Added support for “intersection number” and “color field” (HAN-1191)
  • IMPROVED: 808.121x - The design standard is updated (HAN-1310)
  • FIXED: 3D-sign - Get elevation from task is improved (HAN-1470)
  • FIXED: General - It was not possible to select sign number by typing in main dialogue (HAN-1368)
  • FIXED: TSEXPLODE - Removed a FATAL ERROR if text contain character not defined in TSFONT (HAN-1366)
  • FIXED: 719.11 - Change background color was not working ok (HAN-1364)
  • FIXED: 75x.xx - Added support for moving content by using the up/down arrow (HAN-1367)
  • FIXED: 75x.xx - Removed a FATAL ERROR if user cancel to insert road number (HAN-1373)
  • FIXED: Save Image - Sign 555.0 was not correct when “Stored to Quadri” (HAN-1344)
  • FIXED: Save Image - Some images was clipped when it's a big difference in the width and height (HAN-1351)

Swedish version

  • NEW: IFC - Road signs now has its own conversion file “Road Signs 2 IFC” in Novapoint Basis for writing to IFC (HAN-1274)
  • NEW: Store to Quadri - Added support for controlling “Image Quality” (HAN-1311)
  • IMPROVED: Store to Quadri - Now storing masts as extruded Quadri objects (HAN-1283)
  • IMPROVED: Store to Quadri - The speed on saving image is improved (HAN-1262)
  • IMPROVED: Store to Quadri - Now supporting to save images with “color mapping” (HAN-1156)
  • IMPROVED: Drawing Rule - Road Signs is improved for the drawing rule sketch in Base (HAN-1387)
  • IMPROVED: 3D-sign - Added support for more than two poles in a “sign configuration” (HAN-1345)
  • IMPROVED: 3D-sign - Added support to modify elevation directly in grid for BL, BC and BR (HAN-1346)
  • FIXED: 3D-sign - Get elevation from task is improved (HAN-1470)
  • FIXED: F5 - Wrong alignment of text in combination with E19 (HAN-1270)
  • FIXED: F5 - Wrong value for text spacing in some combinations (HAN-1337)

Updates in Novapoint Road Marking

All versions
  • IMPROVED: IFC - Conversion file “Road Marking 2 IFC” is update with new RGB values for color (HAN-1389)
  • IMPROVED: Drawing Rule - Improved drawing rule for Road Marking in Plan and 3D view in Base (HAN-1374)
  • FIXED: Store to Quadri - Not all geometry was stored if it was in “Outline mode” (HAN-1365)
  • FIXED: Draw Reference Symbol - Text height and insertion point was not ok (HAN-1402)

Danish version

  • FIXED: CUIX - The command name in ribbon menu was wrong for “Draw ref. symbol” (HAN-1408)

Update Quadri Easy Access

Last modified: 2019/05/28 15:13 by vn_no_dso
CC Attribution-NoDerivs 3.0 Unported License.